DIA-XT6 | 6.5" 225 WATT RMS WATT MID-RANGE LOUDSPEAKER WITH BUILT IN TWEETER
Lease for as low as $/week
Guaranteed safe & secure checkout
Black Diamond 6.5" 450 Watts 4-Ohm Mid-Range Speaker w/ Bullet Tweeter Built In
Black Diamond introduces a midrange that handles it all! A mid-range driver that can answer the call to handle the most significant part of the audible sound spectrum. A speaker that sounds great with just instrumentals and, even better with vocals. This midrange has power you can count on! The DIA-XT6 delivers an impressive 450 Watts Max Power with 225 Watts RMS at 4 Ohms, which is enough to tackle a full range of audio. Exclusive Black Diamond design. 27oz magnet with 1.5 inch high strength voice coil for high power applications. Get the most out of your system by upgrading to a speaker that gives you everything you're missing from your stock stereo. Discover what a true midrange speaker can do for you!
This Listing Includes:
(1) Black Diamond 6.5" Midrange Loudspeaker DIA-XT6
FEATURES:
- Built-In Bullet Tweeter
- 450 Max Watts
GENERAL SPECIFICATIONS:
Nominal Diameter: 6.5"
RMS Power Handling: 225 Watts
MAX Power Handling: 450 Watts
Nominal Impedance: 4 Ohm
Sensitivity: (1w/1m): 96 dB
Frequency Response: 95Hz-22KHz
Recommended Hi Pass Crossover: 120 Hz
WOOFER SPECIFICATIONS:
Voice Coil Diameter: 1.5″ / 38.6 mm
Voice Coil Former Material: Kapton
Winding Material: CCAW
Cone Material: Paper
Surround Material: Cloth
Basket Material: Steel
Magnet Material: Ferrite
Magnet Weight: 27 oz
THIELE & SMALL PARAMETERS:
Equivalent Volume: Vas 2.917L
Excursion: Xmax 16mm
Free Air Resonance: Fs 150Hz
Mechanical Factor: Qms 3.906
Electrical Factor: Qes 0.747
Total Factor: Qts 0.627
DC Resistance: Re 3.2 Ohms
TWEETER SPECIFICATIONS
:Voice Coil Diameter: 1"
Voice Coil Former Material: Kapton
Winding Material: CCAW
Diaphragm Material: Aluminum Alloy
Magnet Material: Neodymium (N38H)
Magnet Weight: 0.44 oz
MEASUREMENTS:
Overall Diameter : 6.6″ / 168mm
Overall Depth: 3.62″ / 92mm
Front Mount Baffle Cutout: 5.66″ / 144 mm
Mounting Depth: 3.07″ / 78 mm
Motor Diameter: 4.6″ / 117mm
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
