The Lv6m5 Elite is DC Audio’s 4” Coil Beast. It has evolved into what most big builds are after, a sub that can take lots of power and Crush Out the Lows!!
With a world that has access to amplifiers of today's size we knew we needed a subwoofer that could keep up. A Large flat wound 4” Coil and 10” Spaced Spiders with Plenty of Xmax clearance is what we have to offer in the Level 6!!
The new Lv6m5 Elite will find itself at home in the SPL lanes or slappin down your hometowns cruise strip.
To really step it up with this driver take a look at the Carbon Fiber cone and dustcap options available for it.
We have changed the cosmetic look of the driver as well as added a pole vent to the motor.
Key Features
• Extremely strong kraft pulp fiber reinforced cone
• Wide Long Throw foam surround
• Dome propylene dust cover with White DC logo
• 10” OD Spaced Spiders
• Extra heavy duty sewn tinsel lead wire
• Cast DC Series aluminum black frame 15”/18”
• FEA analyzed and optimized motor assembly – Fully CNC machined
• Rubber mounting gasket / Motor Boot
• 8 AWG Direct leads
• DVC 4.0” 8 Layer Hi-temp Aluminum voice coil wound on a Black Anodized Aluminum voice coil former with high current input strips.
| Sub Size | 15" | 18" |
| Mounting Depth | 12.00" | 13.00" |
| Mounting Hole Diameter | 14.25" | 16.90" |
| Outside Driver Diameter | 15.70" | 18.50" |
| Motor Width | 10.62" | 10.62" |
| Weight | Coming Soon | Coming Soon |
| VC Diameter | 4" | 4" |
| Displacement | .22³ ft | .27³ ft |
| Motor Weight | Coming Soon | Coming Soon |
| Power Handling RMS/Peak | 4500 / 9000 | 4500 / 9000 |
| Impedance (Ohm) | D.7 / D1 / D1.4 / D2 | D.7 / D1 / D1.4 / D2 |
| Sd | 815cm² | 1217cm² |
| Vas | Coming Soon | Coming Soon |
| Cms | Coming Soon | Coming Soon |
| Mms | Coming Soon | Coming Soon |
| Fs | Coming Soon | Coming Soon |
| BL | Coming Soon | Coming Soon |
| Re | Coming Soon | Coming Soon |
| Le | Coming Soon | Coming Soon |
| Qms | Coming Soon | Coming Soon |
| Qes | Coming Soon | Coming Soon |
| Qts | Coming Soon | Coming Soon |
| Xmax | Coming Soon | Coming Soon |
| Ref SPL @ 1 watt | Coming Soon | Coming Soon |
| Suggested Sealed | N/A | N/A |
| Suggested Ported | 3.25³ ft | 5.5³ ft |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
