Amazing specifications and extreme power performance.
The upgraded amplifier circuitry, the updated management of the key mosfet transistors, and increased voltage in the power supply unit allowed to increase the output power by 15%.
Equally high efficiency in the entire range of operating voltage - from 9 to 15 volts, gives a wide application in competition level SPL systems. Bridge mode allows you to double the output power.
Reliable four-level protection system provides high-level protection against overheating, overload, short circuit and direct current. In addition to adjusting the gain level, the remote controller is equipped with all the necessary indicators for maximum control over the audio system.
|Number of the channels||2|
|Frequency response||10 - 10000 Hz|
|1 Ohm RMS Power (15 V)||1600 W x 2|
|1 Ohm RMS Power (14.4 V)||1500 W x 2|
|2 Ohm RMS Power (14.4 V)||770 W x 2|
|4 Ohm RMS Power (14.4 V)||400 W x 2|
|2 Ohm RMS Power (Bridge)||3000 W x 1|
|4 Ohm RMS Power (Bridge)||1500 W x 1|
|Minimum permissible load on the channel||1 Ohm|
|Minimum permissible load in a bridge connection||2 Ohm|
|Input SPL||0.2 - 6 V|
|Low pass filter||35 - 10000 Hz|
|High pass filter||10 - 1000 Hz|
|LPF and HPF simultaneous operation||True|
|Input terminal||0 Ga|
|Output terminal||8 Ga|
|Damping factor||≥ 200|
|Fuse rating||300 A|
|Working voltage||9 - 15 V|
|Phase regulation||0 - 180°|
|Signal-to-noise ratio||≥ 95 dB|
|Size (W×L×H)||10.00 × 18.90 × 2.54 inch|
|Gross weight||22.60 lb (10.25 kg)|
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.