The purpose of this tool is to enable the user to:
- Measure True Amplifier Power output into any load reactive or resistive
- Measure Common DC voltages
- Measure DC voltage drops during quick transients on cable runs or battery / charging systems
- Measure Impedance of speakers at any power or frequency from 20Hz - 1kHz (box rise)
- Measure Phase Difference between Voltage and Current into reactive loads (Power Factor)
- Find Tuning Frequency of subwoofer enclosures
- Tune subwoofer enclosures for maximum power transfer
- Measure AC Volts (amplifier output)
- Measure AC Amps (amplifier output)
- Measure apparent power (VA) output, Phase Angle, and Real Power (Watts) of audio amplifier, or consumption of appliances that run on AC power
- Measure Frequency of a Sine Wave
What is included?
- The AMM-1 tool
- Protective silicon rubber boot
- Harness
- This manual
- Pride of ownership
Specifications
- DC Voltmeter: -100 Volts to +100 Volts
- AC Voltmeter: 0 - 150 VRMS
- AC Ammeter: 0 - 100 ARMS
- AC Apparent Power: 0 - 15,000 VA
- Power Factor: 50 - 100%
- Frequency: 10 - 20,000 Hz
- AC Impedance: 0 - 200 Ohms
- True Power Dyno: 0 - 15,000 Watts
- Auto-shut off timer: 8 - 10 minutes after ON button is pressed
- Battery self-test and display of condition when AMM-1 is initialized
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.