6XS
6 Channel Electronic Crossover
The 6XS does it all. Sharp 24dB/octave Linkwitz-Riley alignment crossover with remote level control for the bass. Automode™ input switching automatically configures the 6XS for two, four or six channels of input with up to eight channels of output. Includes bass management with the Programmable Frequency Match (PFM) circuit and a high tech PWM power supply for maximum voltage in all conditions.
Features
- Six Channels in – Eight Channels Out
- State-Variable, 24dB per Octave, 2-way Active Crossover
- Audiophile Crossover Performance
- Output Level Controls
- High Voltage Outputs
- Low Impedance Line Driver
- Remote Subwoofer Level Control
- PFM Subsonic Filter
- Bass Output Control
Specifications
Inputs
- Preamp Inputs: 3 (6 channels)
- Input Gain: 12dB (front/rear), 18dB (sub)
- Input Impedance: 20kΩ
Outputs
- Preamp Outputs: 4 (8 channels)
- Maximum Output Level: 9.5Vrms / 13V peak
- Output Impedance: 150Ω
Performance
- Total Harmonic Distortion: 0.005%
- Frequency Response: 10Hz-100kHz ±1dB
- Signal to Noise: 110dB
- Crossover Type: 24dB/octave Linkwitz-Riley
- Crossover Frequency: 90 Hz from factory (user programmable)
Control
- Remote In
General
- Power Supply: High Headroom PWM
- Current Draw: 400mA
- Recommended Fuse Rating: 2A
Weights & Dimensions
- Dimensions: 7.25″W x 7.7″D x 1.25″H
- Weight: 2.5lbs (1.13kg)
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.