MD3000 – 1 or 2 OHM - Mono High Power Car Audio Amplifier
| Line | MD |
| Reference | MD 3000.1 |
| Number of Channels | 01 |
| Max Output Power | @ 12,6 VDC - 1 OHM: 3000W RMS @ 12,6 VDC - 2 OHMS: 1920W RMS |
| Signal Noise/Ratio | >90dB |
| Frequency Response | 10Hz - 18Khz (-3dB) |
| Input Impedance | 22K Ohms |
| Protection System | Short-Circuit to Output, Short on output compared to GND, Low impedance at output, High/Low supply voltage and Thermal protection |
| Minimum Supply Voltage | 9 VDC |
| Maximum Supply Voltage | 16 VDC |
| Idle Consumption | 1.00A |
| Musical Maximum Consumption | 150A |
| Sinusoidal Signal Maximum Consumption | 300A |
| Dimensions (WxHxD) | 228 x 70 x 218(L x A x P) | 8.98" x 2.76" x 8.58"(W x H x L) |
| Weight | 2.5Kg (5.5lb) |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
