With our mid class HEAVYHITTER series, you can achieve the bass you're looking for. With 1250rms of power, high roll surround and a 200oz motor to push the power, this ain't your average Joe. The HEAVYHITTER series welcomes you to low frequency.
Specifications
10" Aluminum basket
Non pressed paper cone
Dual 2ohm
3inch CCAW coil
4 layer spider
Rms: 1250w rms
Max:2500w
High roll foam surround for max excursion
200oz motor
Xmax:33mm one way
Qms: 5.71
Qes: 0.53
Qts: 0.49
Fs:33Hz
Sensitivity:83.5Hz
BI:21.4
Re:3.8
Frenquency response:23-250Hz
25lbs
Box Information
Mounting depth 6.5"
Cutout Diameter 9.25"
Magnet diameter 8"
Total height 8"
Outside diameter 10.95"
Recommended Sealed Volume: 1.20 - 1.50 ft³
Recommended Ported Volume: 1.75 - 2.00 ft³
Recommended Port Area: 22.0 in²
Recommended Tuning Frequency: 30-35hz
Warranty:
- Manufacturer defect and shipping damage warranty only. If product is blown and burnt such as an unwound coil, burnt black coil, burnt tinsel leads it is not covered. This also applies to amplifiers, if it is burnt inside the amp due to stress on mosfets it is not covered.
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
