The DS18 GEN-X line was developed with the customer in mind. We wanted to produce the sturdiest amplifier possible within a reasonable price range, and after months of R&D, we finally put together the most attractive design with top of the line internal technologies. All internal parts are manufactured by DS18. With their lower power consumption and high efficiency, the GEN-X amplifiers can be installed without the need of a secondary or high-output alternator.
| Model: | GEN-X6000.1D |
| Number of Channels: | 1 |
| MAX Power: | 6000W |
| 1 Ohm RMS Power (14.4V) Per Channel: | 1 x 2000W |
| 2 Ohm RMS Power (14.4V) Per Channel: | 1 x 1200W |
| 4 Ohm RMS Power (14.4V) Per Channel: | 1 x 700W |
| Speaker Impedance Range: | 1-4 Ohm |
| Input Sensitivity: | 0.2V-+6dB |
| Low Pass Filter: | 30Hz - 80Hz |
| High Pass Filter: | 40Hz - 180Hz |
| Signal-to-Noise Ratio: | 98dB |
| THD: | 0.01% |
| Bass Boost: | 0dB-+12dB |
| Product Dimensions (L x W x H): | 478 x 190 x 55mm |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
