SSA DM100.4 Amplifier
Introducing the all new SSA DM100.4 amplifier. An old school approach, with updated components, for the most discerning of ears. If your front stage is lacking warmth and clarity, its time to upgrade. Our first 4 channel amplifier in our high-end, sound quality, Class- A/B - Demon amplifier line. The SSA DM100.4 is the elite choice for that high end active front stage, premium passive components, and especially a sound quality sub (SSA Demon in a 3-way set up). Stellar looks to match the design and components. Don't let your speakers or your ears down, #levelup to the all new SSA DM100.4 amplifier.
- 100 Watts RMS X 4 @ 4 Ohm
- 350 Watts RMS X 2 @ 4 Ohm
- Fully active capable crossover network
- Bass Boost Feature for Channels 3/4 when being used for a subwoofer in 3-way set up
- Angled Terminals for show quality installations
- Full Complimentary low distortion Class AB design
- Tiffany Style RCA connectors
- Full Complimentary low distortion Class AB design
- Butterworth Crossover Filters
- The op amps featured are TI chips w/BB technology high performance audio grade IC's
- Docking Pads® to reduce vibration & extend the life the amplifier
- DC, Short Circuit, Thermal & Overload Protection, on board fusing
- Diagnostic LEDs
Specifications
OUTPUT POWER @ 14.4V input | |
RMS per channel at 4 Ohms | 100 W x 4 CH |
RMS per channel at 2 Ohms | 175 W x 4 CH |
RMS Bridged Mono at 4 Ohms | 350 W x 2 CH |
RMS Mono at 1 Ohm | N/A |
INPUT SENSITIVITY | 200mV - 6.0V |
FREQUENCY RESPONSE | 10Hz - 30KHz +/- 0.5dB |
THD | LESS THAN 0.01% |
S/N RATIO | > 97 dB |
CHANNEL SEPARATION | > 92 dB |
DAMPING FACTOR @100Hz 4 ohm | > 200 |
CROSSOVER RANGE | CH 3&4, CH 1&2 |
High Pass, 12dB/Octave | 15-500 Hz, 50-3K Hz |
Low Pass, 24dB/Octave | 50 - 500 Hz, 500 - 5K Hz |
Band Pass | N/A |
Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) | – |
Wired remote bass control included | No |
Phase Shift (0 - 180 degrees) | No |
Fusing | 3 x 35A |
Size (L x W x H) in | 17.7 x 8.9 x 2.2 |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.