Unlike most factory car speakers that lack depth in sound, we engineered our speakers with premium audio materials like woven fiberglass cones, butyl high roll surrounds, and die cast aluminum housings. It's time to upgrade your system with our BLACKOUT 4" speakers.
Complete your setup with our high performing 1" component tweeters. Engineered to deliver excellent crisp, clear highs for our listeners seeking that extra detail in their sound stage. External crossovers, cup pods, and mounting hardware are included and provided for each individual tweeter with this set. Sold as a pair.
Universal 4" fitment means these will replace almost any of the 4" factory speakers in most vehicles. Take a look at the dimensions below and reference them against your current speakers to ensure fitment. We are not responsible for improper fitment. Professional installation is encouraged.
Included in each order is a pair (2) of 4" speakers, the mesh basket covers a pair (2) of 1" component tweeters, a pair (2) of crossovers, and mounting hardware.
Speaker Specifications
| Product Parameters | |
| Type | Medium Bass Speaker |
| Size | 4 inch (4") |
| Impedance | 4ohm Ω |
| RMS Power | 60w |
| Max Power | 300w |
| Magnet | Y30 7.650z |
| Voice Coil | 25mm/1" Copper |
| Basket | Aluminum |
| Cone | Woven Glass Fiber and rubber edge |
| Sensitivity | 83DB/W/(1M) |
| Frequency Range | 85Hz-11KHz |
| Speaker Mounting Depth | 2.25" |
| Speaker Total Height | 2.80" |
| Speaker Total Width | 4.75" |
Tweeter Specifications
|
Speaker Type |
Component Tweeter |
| RMS Power | 80 Watts (Pair) |
| Peak Power | 150 Watts (Pair) |
| Sensitivity | 95db |
| Sold As Pair | Yes |
| Magnet Material | Neodymium |
| Voice Coil Size | 1" (25mm) |
| Frequency Response | 2k - 20 kHz |
| Voice Coil Impedance | Single 4Ω |
| Crossovers |
Included (pair) |
| Tweeter Height | 1" |
| Mounting Depth | 0.6" |
| Tweeter Diameter | 2.5" |
| Crossover Width | 3" |
| Crossover Length |
5.5" |
| Crossover Height | 1.25" |
| Cut-Out Diameter | 1.85" |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
