Avatar ATU-2000.1D - 1-channel amplifier (D class) with nominal power 2000W.
Practical design, high power and considered filters make these models excellent decision for loud and high-quality car audio system.
Cast aluminium body has very good breaking resistanse. Also, heat resistance is very effective.
All the TSUNAMI monoblocs are bridgeable, that allows doubling the power to get desired maximum of sound pressure.
|Number of the channels||1|
|Frequency Response||8 - 180 Hz|
|1 Ohm RMS Power (14.4 V)||2000 W|
|2 Ohm RMS Power (14.4 V)||1350 W|
|4 Ohm RMS Power (14.4 V)||900 W|
|Minimum permissible load on the channel||1 Ohm|
|Minimum permissible load in a bridge connection||2 Ohm|
|Input SPL||0.2 - 5 V|
|Low Pass Filter||40 - 180 Hz|
|Subsonic Filter||10 - 50 Hz|
|Bass Boost||0 - 12 dB|
|Input Terminal||0 Ga|
|Output Terminal||8 Ga|
|Working Voltage||10 - 15 V|
|Signal-to-noise Ratio||≥ 70 dB|
|Size (WxLxH)||16.38 x 7.28 x 2.32 inch|
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.